also if the nand really is dying that wouldnt be wise either. What could be the problem? is the nand dying? normaly i would create a new nand via orig kv.bin, cpukey and flash that but i dont have a hardware flasher on hand. Its the same when i dump the nand via xell relaoded. The 360 NandFlasher from Maximus is one of the latest products from the team which allows you to read and write to the NAND firmware chip of the 360, this can be useful in many ways, the first is for people that have consoles that either the drive has totally died and the key for the drive is lost, or that bought damaged consoles that had no. ***** WARNING: nanddump.bin has a mixed controller LBA at block 0x4 (raw offset 0x10800), block ignored ***** WARNING: nanddump.bin has a mixed controller LBA at block 0x3 (raw offset 0xc600), block ignored 256/512 MB NANDs take round about 16mins. the Data gets verified for each extraction and writing step. With a 16 MB NAND this takes about 8min, Including three extractions steps and one for writing. With this program you can update to a new version of freeboot within minutes over USB. This is likely caused by previously using jaspersb on a jasper type console! The NAND Flasher 360 is a NAND -flash program for MS Windows. ***** WARNING: nanddump.bin has a mixed controller LBA at block 0x2 (raw offset 0x8400), block ignored dumped the current xebuild nand via simple annd flasher.xex but creating the latest xebuild nand fails with the following following error: So a friend of mine gave me his currently working falcon rgh with dash 15xxx(he said so and jrunners/xebuild autoselectes rgh 1), so i can update it.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |